dmesg - after build
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ab7c1fff] usable
BIOS-e820: [mem 0x00000000ab7c2000-0x00000000ab7c8fff] ACPI NVS
BIOS-e820: [mem 0x00000000ab7c9000-0x00000000ac805fff] usable
BIOS-e820: [mem 0x00000000ac806000-0x00000000acd7afff] reserved
BIOS-e820: [mem 0x00000000acd7b000-0x00000000be909fff] usable
BIOS-e820: [mem 0x00000000be90a000-0x00000000beb1dfff] reserved
BIOS-e820: [mem 0x00000000beb1e000-0x00000000bec04fff] ACPI NVS
BIOS-e820: [mem 0x00000000bec05000-0x00000000bf7fefff] reserved
BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z87X-D3H/Z87X-D3H-CF, BIOS F7 08/02/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF0000000 write-back
3 base 0430000000 mask 7FF8000000 write-back
4 base 0438000000 mask 7FFC000000 write-back
5 base 043C000000 mask 7FFE000000 write-back
6 base 043E000000 mask 7FFF000000 write-back
7 base 00C0000000 mask 7FC0000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 16896MB, range: 256MB, type WB
reg 3, base: 17152MB, range: 128MB, type WB
reg 4, base: 17280MB, range: 64MB, type WB
reg 5, base: 17344MB, range: 32MB, type WB
reg 6, base: 17376MB, range: 16MB, type WB
reg 7, base: 3GB, range: 1GB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 1GB, type WB
reg 5, base: 17392MB, range: 16MB, type UC
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd700-0x000fd70f] mapped at [ffff8800000fd700]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbf7fffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbf7fffff] page 2M
kernel direct mapping tables up to 0xbf7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x43effffff]
[mem 0x100000000-0x3ffffffff] page 1G
[mem 0x400000000-0x43effffff] page 2M
kernel direct mapping tables up to 0x43effffff @ [mem 0xbe908000-0xbe909fff]
RAMDISK: [mem 0x355f2000-0x36af0fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000bebdd080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bebe82e8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bebdd190 0B151 (v02 ALASKA A M I 000000F7 INTL 20091112)
ACPI: FACS 00000000bec03080 00040
ACPI: APIC 00000000bebe83f8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bebe8470 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bebe84b8 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bebe89f8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 00000000bebe94d0 0003C (v01 01072009 MSFT 00000097)
ACPI: HPET 00000000bebe9510 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000bebe9548 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000bebe98b8 03299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000bebecb58 00080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: MATS 00000000bebecbd8 00034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
Initmem setup node 0 [mem 0x00000000-0x43effffff]
NODE_DATA [mem 0x43effc000-0x43effffff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xab7c1fff]
node 0: [mem 0xab7c9000-0xac805fff]
node 0: [mem 0xacd7b000-0xbe909fff]
node 0: [mem 0xbf7ff000-0xbf7fffff]
node 0: [mem 0x100000000-0x43effffff]
On node 0 totalpages: 4182812
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 758735 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3350592 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ab7c2000 - 00000000ab7c9000
PM: Registered nosave memory: 00000000ac806000 - 00000000acd7b000
PM: Registered nosave memory: 00000000be90a000 - 00000000beb1e000
PM: Registered nosave memory: 00000000beb1e000 - 00000000bec05000
PM: Registered nosave memory: 00000000bec05000 - 00000000bf7ff000
PM: Registered nosave memory: 00000000bf800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113238
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16365252k/17809408k available (6711k kernel code, 1078160k absent, 365996k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3399.754 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.50 BogoMIPS (lpj=13599016)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000bea9c000 end: 0x000000beaa8fff
IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (27198.03 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xab7c2000-0xab7c8fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbeb1e000-0xbec04fff] (946176 bytes)
dummy:
RTC time: 21:17:49, date: 11/01/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000beb13c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000beb13618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000beb12d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: >host bridge window [mem 0xc0000000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: >root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xfeafffff]
pci 0000:00:00.0: >[8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: >[8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: >[8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: >reg 10: [mem 0xf3120000-0xf312ffff 64bit]
pci 0000:00:14.0: >PME# supported from D3hot D3cold
pci 0000:00:16.0: >[8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xf313b000-0xf313b00f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: >[8086:153b] type 00 class 0x020000
pci 0000:00:19.0: >reg 10: [mem 0xf3100000-0xf311ffff]
pci 0000:00:19.0: >reg 14: [mem 0xf3139000-0xf3139fff]
pci 0000:00:19.0: >reg 18: [io 0xf040-0xf05f]
pci 0000:00:19.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xf3138000-0xf31383ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xf3130000-0xf3133fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xf3137000-0xf31373ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0xf090-0xf097]
pci 0000:00:1f.2: >reg 14: [io 0xf080-0xf083]
pci 0000:00:1f.2: >reg 18: [io 0xf070-0xf077]
pci 0000:00:1f.2: >reg 1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: >reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: >reg 24: [mem 0xf3136000-0xf31367ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xf3135000-0xf31350ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: >[10de:0611] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:00.0: >reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: >reg 1c: [mem 0xf0000000-0xf1ffffff 64bit]
pci 0000:01:00.0: >reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: >reg 30: [mem 0xf3000000-0xf301ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xe0000000-0xf30fffff]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:03:00.0: >[8086:244e] type 01 class 0x060401
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: >PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1c.3: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.3: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.3: > bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: >[1102:0008] type 00 class 0x040100
pci 0000:04:00.0: >reg 10: [io 0xd000-0xd03f]
pci 0000:04:00.0: >supports D1 D2
pci 0000:03:00.0: >PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:03:00.0: > bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: > bridge window [io 0xd000-0xdfff] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:03:00.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:03:00.0: > bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xab7c2000-0xabffffff]
e820: reserve RAM buffer [mem 0xac806000-0xafffffff]
e820: reserve RAM buffer [mem 0xbe90a000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3e]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xc0000000-0xfeafffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed40000-0xfed44fff]
system 00:01: >[mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0081-0x0091]
pnp 00:02: >[io 0x0093-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[mem 0xff000000-0xffffffff]
pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: >[mem 0xfed00000-0xfed003ff]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x1c00-0x1cfe]
pnp 00:05: >[io 0x1d00-0x1dfe]
pnp 00:05: >[io 0x1e00-0x1efe]
pnp 00:05: >[io 0x1f00-0x1ffe]
pnp 00:05: >[io 0x1800-0x18fe]
pnp 00:05: >[io 0x164e-0x164f]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x1c00-0x1cfe] has been reserved
system 00:05: >[io 0x1d00-0x1dfe] has been reserved
system 00:05: >[io 0x1e00-0x1efe] has been reserved
system 00:05: >[io 0x1f00-0x1ffe] has been reserved
system 00:05: >[io 0x1800-0x18fe] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x1854-0x1857]
system 00:07: >[io 0x1854-0x1857] has been reserved
system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: >[io 0x0a00-0x0a0f]
pnp 00:08: >[io 0x0a30-0x0a3f]
pnp 00:08: >[io 0x0a20-0x0a2f]
system 00:08: >[io 0x0a00-0x0a0f] has been reserved
system 00:08: >[io 0x0a30-0x0a3f] has been reserved
system 00:08: >[io 0x0a20-0x0a2f] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[io 0x0060]
pnp 00:09: >[io 0x0064]
pnp 00:09: >[irq 1]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: >[io 0x03f8-0x03ff]
pnp 00:0a: >[irq 4]
pnp 00:0a: >[dma 0 disabled]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: >[io 0x0010-0x001f]
pnp 00:0b: >[io 0x0022-0x003f]
pnp 00:0b: >[io 0x0044-0x005f]
pnp 00:0b: >[io 0x0062-0x0063]
pnp 00:0b: >[io 0x0065-0x006f]
pnp 00:0b: >[io 0x0072-0x007f]
pnp 00:0b: >[io 0x0080]
pnp 00:0b: >[io 0x0084-0x0086]
pnp 00:0b: >[io 0x0088]
pnp 00:0b: >[io 0x008c-0x008e]
pnp 00:0b: >[io 0x0090-0x009f]
pnp 00:0b: >[io 0x00a2-0x00bf]
pnp 00:0b: >[io 0x00e0-0x00ef]
pnp 00:0b: >[io 0x04d0-0x04d1]
system 00:0b: >[io 0x04d0-0x04d1] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[io 0x00f0-0x00ff]
pnp 00:0c: >[irq 13]
pnp 00:0c: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0d: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: >[mem 0xfed10000-0xfed17fff]
pnp 00:0d: >[mem 0xfed18000-0xfed18fff]
pnp 00:0d: >[mem 0xfed19000-0xfed19fff]
pnp 00:0d: >[mem 0xf8000000-0xfbffffff]
pnp 00:0d: >[mem 0xfed20000-0xfed3ffff]
pnp 00:0d: >[mem 0xfed90000-0xfed93fff]
pnp 00:0d: >[mem 0xfed45000-0xfed8ffff]
pnp 00:0d: >[mem 0xff000000-0xffffffff]
pnp 00:0d: >[mem 0xfee00000-0xfeefffff]
pnp 00:0d: >[mem 0xf7fef000-0xf7feffff]
pnp 00:0d: >[mem 0xf7ff0000-0xf7ff0fff]
system 00:0d: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: >[mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: >[mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:0d: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: >[mem 0xff000000-0xffffffff] has been reserved
system 00:0d: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: >[mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0d: >[mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0d: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xe0000000-0xf30fffff]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:03:00.0: >PCI bridge to [bus 04-04]
pci 0000:03:00.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: >PCI bridge to [bus 03-04]
pci 0000:00:1c.3: > bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: >resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: >resource 13 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: >resource 1 [mem 0xe0000000-0xf30fffff]
pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: >resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:03: >resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: >resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: >resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: >resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: >resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: >resource 13 [mem 0xc0000000-0xfeafffff]
pci_bus 0000:04: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: >resource 4 [io 0xd000-0xdfff]
pci_bus 0000:04: >resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:04: >resource 9 [io 0x0d00-0xffff]
pci_bus 0000:04: >resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: >resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: >resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: >resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: >resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: >resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: >resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: >resource 17 [mem 0xc0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xba908000-0xbe907fff] (64MB) mapped at [ffff8800ba908000-ffff8800be907fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1383340668.292:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 31963
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 60
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 21500k freed
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xf3136000 port 0xf3136300 irq 42
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf3138000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf3137000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: >setting latency timer to 64
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf3120000
xhci_hcd 0000:00:14.0: >irq 43 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >14 ports detected
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >6 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:54:297
rtc_cmos 00:06: >setting system clock to 2013-11-01 21:17:49 UTC (1383340669)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: Hitachi HDT721064SLA360, STDOA31B, max UDMA/133
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/133
ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA Hitachi HDT72106 STDO PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
ata4.00: ATAPI: HL-DT-ST DVDRAM GH40N, NM00, max UDMA/100
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata5.00: configured for UDMA/133
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: configured for UDMA/100
sda: sda1
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: >[sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sdb] Write Protect is off
sd 1:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 1:0:0:0: >[sdb] Attached SCSI disk
scsi 2:0:0:0: >Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
sd 2:0:0:0: >Attached scsi generic sg2 type 0
sd 2:0:0:0: >[sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: >[sdc] 4096-byte physical blocks
sd 2:0:0:0: >[sdc] Write Protect is off
sd 2:0:0:0: >[sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: >[sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: >[sdc] Attached SCSI disk
scsi 3:0:0:0: >CD-ROM HL-DT-ST DVDRAM GH40N NM00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: >Attached scsi CD-ROM sr0
sr 3:0:0:0: >Attached scsi generic sg3 type 5
scsi 4:0:0:0: >CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
sr 4:0:0:0: >Attached scsi CD-ROM sr1
sr 4:0:0:0: >Attached scsi generic sg4 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[114]: starting version 175
wmi: Mapper loaded
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: >setting latency timer to 64
e1000e 0000:00:19.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: >irq 44 for MSI/MSI-X
usb 1-1: >New USB device found, idVendor=8087, idProduct=8008
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092880a2)
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 62.92.23.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000028
[drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028
[drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00020030
[drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c0c080
[drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:01:00.0: DCB conn 01: 00002130
[drm] nouveau 0000:01:00.0: DCB conn 02: 00000210
[drm] nouveau 0000:01:00.0: DCB conn 03: 00000211
[drm] nouveau 0000:01:00.0: DCB conn 04: 00000213
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC17F
e1000e 0000:00:19.0: >eth0: (PCI Express:2.5GT/s:Width x1) 94:de:80:6d:11:36
e1000e 0000:00:19.0: >eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: >eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC530
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD2AB
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD3CD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD5FD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD662
[drm] nouveau 0000:01:00.0: 0xD662: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 8195138 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (GDDR3)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 3: core 660MHz shader 1650MHz memory 950MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: core 399MHz shader 810MHz memory 399MHz voltage 1050mV
[drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
usb 2-1: >New USB device found, idVendor=8087, idProduct=8000
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x2c0000, bo ffff880422e75c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
usb 3-9: >new high-speed USB device number 2 using xhci_hcd
usb 3-9: >New USB device found, idVendor=045b, idProduct=0209
usb 3-9: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9:1.0: >USB hub found
hub 3-9:1.0: >4 ports detected
EXT4-fs (sdb5): INFO: recovery required on readonly filesystem
EXT4-fs (sdb5): write access will be enabled during recovery
Refined TSC clocksource calibration: 3399.997 MHz.
Switching to clocksource tsc
usb 3-10: >new high-speed USB device number 3 using xhci_hcd
usb 3-10: >New USB device found, idVendor=045b, idProduct=0209
usb 3-10: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-10:1.0: >USB hub found
hub 3-10:1.0: >4 ports detected
usb 3-14: >new low-speed USB device number 4 using xhci_hcd
usb 3-14: >New USB device found, idVendor=046d, idProduct=c051
usb 3-14: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14: >Product: USB-PS/2 Optical Mouse
usb 3-14: >Manufacturer: Logitech
usb 3-14: >ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/input/input3
hid-generic 0003:046D:C051.0001: >input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-14/input0
usb 4-5: >new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: >New USB device found, idVendor=045b, idProduct=0210
usb 4-5: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-5:1.0: >USB hub found
hub 4-5:1.0: >4 ports detected
usb 4-6: >new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: >New USB device found, idVendor=045b, idProduct=0210
usb 4-6: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-6:1.0: >USB hub found
hub 4-6:1.0: >4 ports detected
usb 3-9.2: >new high-speed USB device number 5 using xhci_hcd
usb 3-9.2: >New USB device found, idVendor=1058, idProduct=1003
usb 3-9.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-9.2: >Product: External HDD
usb 3-9.2: >Manufacturer: Western Digital
usb 3-9.2: >SerialNumber: 57442D574341553443323135353034
usb 3-9.2: >ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-9.2: >ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Initializing USB Mass Storage driver...
usbcore: registered new interface driver uas
scsi6 : usb-storage 3-9.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 3-10.1: >new high-speed USB device number 6 using xhci_hcd
usb 3-10.1: >New USB device found, idVendor=152d, idProduct=2338
usb 3-10.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 3-10.1: >Product: USB to ATA/ATAPI bridge
usb 3-10.1: >Manufacturer: JMicron
usb 3-10.1: >SerialNumber: 000001D918E1
usb 3-10.1: >ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-10.1: >ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi7 : usb-storage 3-10.1:1.0
EXT4-fs (sdb5): orphan cleanup on readonly fs
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 4718615
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 918963
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231873
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231934
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231932
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231851
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231977
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231938
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231969
EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 2231942
EXT4-fs (sdb5): 10 orphan inodes deleted
EXT4-fs (sdb5): recovery complete
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: >Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4
sd 6:0:0:0: >Attached scsi generic sg5 type 0
sd 6:0:0:0: >[sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: >[sdd] Write Protect is off
sd 6:0:0:0: >[sdd] Mode Sense: 23 00 00 00
sd 6:0:0:0: >[sdd] No Caching mode page present
sd 6:0:0:0: >[sdd] Assuming drive cache: write through
sd 6:0:0:0: >[sdd] No Caching mode page present
sd 6:0:0:0: >[sdd] Assuming drive cache: write through
sdd: sdd1
sd 6:0:0:0: >[sdd] No Caching mode page present
sd 6:0:0:0: >[sdd] Assuming drive cache: write through
sd 6:0:0:0: >[sdd] Attached SCSI disk
scsi 7:0:0:0: >Direct-Access WDC WD32 00BPVT-00HXZT3 PQ: 0 ANSI: 2 CCS
sd 7:0:0:0: >Attached scsi generic sg6 type 0
sd 7:0:0:0: >[sde] 78142806 4096-byte logical blocks: (320 GB/298 GiB)
sd 7:0:0:0: >[sde] Write Protect is off
sd 7:0:0:0: >[sde] Mode Sense: 28 00 00 00
sd 7:0:0:0: >[sde] No Caching mode page present
sd 7:0:0:0: >[sde] Assuming drive cache: write through
sd 7:0:0:0: >[sde] 78142806 4096-byte logical blocks: (320 GB/298 GiB)
sd 7:0:0:0: >[sde] No Caching mode page present
sd 7:0:0:0: >[sde] Assuming drive cache: write through
sde: sde1
sd 7:0:0:0: >[sde] 78142806 4096-byte logical blocks: (320 GB/298 GiB)
sd 7:0:0:0: >[sde] No Caching mode page present
sd 7:0:0:0: >[sde] Assuming drive cache: write through
sd 7:0:0:0: >[sde] Attached SCSI disk
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
xhci_hcd 0000:00:14.0: >WARN Event TRB for slot 4 ep 0 with no TDs queued?
xhci_hcd 0000:00:14.0: >WARN Event TRB for slot 5 ep 0 with no TDs queued?
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[480]: starting version 175
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000001860-0x000000000000187f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ppdev: user-space parallel port driver
snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
Audigy2 value: Special config.
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: failsafe main process (696) killed by TERM signal
init: smbd main process (801) killed by HUP signal
init: smbd main process ended, respawning
e1000e 0000:00:19.0: >irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: >irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1392) terminated with status 1
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.